The Bowhead II is a dissolvable ball and collet activated fracturing sleeve system designed for cased hole and open hole applications. Multiple profile length configurations facilitate precise valve activation. The collet allows the liner to be full drift diameter to surface while fracturing each stage, reducing friction pressures and pumping time. The dissolvable ball will flow off of seat with minimal differential pressure due to the unique carrier design, while the collet remains locked into the valve housing. An equal large bore diameter through each collet after the fracture process allows for maximum flowback recovery without intervention. Large bore access allows clean outs from heel to toe with no restrictions in coil or tubing size. Collets can be removed at any point in time allowing full drift of liner and the ability to reclose the valve for water shut off or future re-fracturing processes. All collets can be retrieved in a single run after the coil has reached the toe of the wellbore and circulated clean.